Large-scale breakers are very common in people's daily life. In the whole process of application, the transportation of raw materials and the operation of machinery and equipment will cause a lot of high-pressure gate valve particles in the surrounding environment, causing harm to machinery and equipment and users. How to purify indoor air well, how to do ash removal with hammer crushing?
1, scrubbing and removing ash
Let the air and the water of the sprayer touch to capture the solid state in the center. The common spray dust removal tower is that the air below and the water above the sprayer are washed backwards. The cleaning effect of the washing pipe is good.
2, Inertial force ash removal
It is used to separate particles and air above 5UM. When the dust-laden air hits the baffle of the inertial force dust removal device in the deflection direction, the particles are adsorbed due to the effect of the inertial force. s speed.
3, electric ash removal
This method is to charge the solid particles in the air, and then attract the oppositely charged electrodes to achieve the purpose of removing dust for the large hammer. The electrostatic precipitator raises tens of thousands of volts between the metal discharge electrodes The DC voltage between the north and south poles ionizes the air between the north and south poles. When the negatively ionized air collides with the solid particles, the solid particles are also negatively charged, attracted by the positive electrode, and precipitate after neutralization. This method is suitable for high ash removal requirements. However, the dust concentration should not be too high, and the gas flow should not be too fast.
4. Centrifugal ash removal
The centrifugal force, which is hundreds to thousands of times larger than the particle force in the rotating motion of the air, is used to make the solid particles settle along the peripheral wall to achieve the purpose of removing ash for the large hammer. The inlet velocity is 10-20m\/S, and the diameter of small particles that can be captured can reach 5UM or less.
5, the force of ash removal
It can handle coarse particles above 100UM, used for pre-treatment of coarse dust and other ash removal. The operation steps are to introduce dust-laden air into a large-volume force sedimentation box, reduce the air flow speed, and use force to separate the particles from the air.
