As a type of machinery and equipment that is widely used and has a very high frequency of application, the inspection and maintenance of excavator breakers has become particularly critical. Under these circumstances, it can play a stronger role, the efficiency of engineering construction will be higher, and the service life can be longer. In the maintenance of machinery and equipment, lubricating oil is a very important part, and it can even be said that it The service life of machinery and equipment has a very important service life. Below, the author will briefly tell you about some regulations on the lubricating oil work of the excavator breaker, and I look forward to helping you.
Unlike most preventive maintenance operations (checking once every few hundred hours), the lubricating oil device of the excavator breaker needs lubricating oil every day, and even needs lubricating oil several times a day. According to the standard, lubricating oil is required. The working frequency is every 2 hours. Of course, if we inspect the machinery and equipment on time, it is very likely that the interval between lubricating oil will be shorter. When inspecting, we should observe whether there is any lubricating oil flowing down from the sharp knife. In the case of water leakage, if the seepage stops, it is necessary to lubricate the equipment.
In the link of the excavator breaker, there will be a whole circle of milky substance 3 to 4 inches below the tool shaft housing. If it does not get it, it means that the grease is not enough, and it is necessary to carry out manual lubricating oil.
Manual lubricating oil is actually a very cumbersome operation, very cumbersome and sometimes continues to be abandoned, so the automatic lubricating system occurs, which can be assembled on the isolating switch to ensure the timely supply of grease. In addition, It can also be assembled on a bracket and connected to each other with pipes and excavator breakers.
The excavator breaker needs to choose a suitable bracket in the application process. Only when the isolation switch is paired with the bracket, the system on the bracket will operate very smoothly.
