Large-scale breakers are very common in people's daily life. In the whole process of application, the transportation of raw materials and the operation of machinery and equipment will cause a lot of high-pressure gate valve particles in the surrounding environment, which will cause harm to machinery and equipment and employees. To purify indoor air well, how to do ash removal by hammer crushing?
1, scrubbing and removing ash
Let the vapor and spray water touch to capture the solid in the middle. The common spray dust removal tower is cleaned by the vapor from the bottom and the water above the vapor. The cleaning pipe has a good ash removal effect.
2, get used to ash removal
It is used to separate particles and vapors above 5UM. When the smoke and dust vapor hits the baffle of the conventional dust collector in a deviated direction, the particles are absorbed due to the conventional effect. high rate.
3, electric ash removal
This method is to charge the solid particles in the gas, and then attract them to the oppositely charged electric stage to achieve the purpose of removing ash for the large breaker. The electrostatic precipitator improves the discharge of metal materials by millions The DC voltage of volts ionizes the vapor between the north and south poles. When the negatively ionized vapor of the air collides with the solid particles, the solid particles are also negatively charged, attracted by the positive stage, and accumulate after neutralization. This method is suitable for ash removal It is suitable for places with high regulations, but the dust concentration is not suitable for too high, and the gas pressure is not suitable for too fast.
4. Centrifugal ash removal
The centrifugal force, which is hundreds to thousands of times larger than the particle force in the rotating operation of the gas, causes the solid particles to settle along the peripheral wall, so as to achieve the purpose of removing ash for the large hammer. .Usually the inlet speed is 10-20m\/S, and the small particles that can be captured can be up to 5UM or less in diameter.
5, the force of ash removal
It can solve the coarse particles of more than 100UM, used for the pretreatment of coarse dust and other ash removal. The operation steps are to introduce the dust-containing gas into the large-volume force sedimentation box, reduce the flow rate of the gas, and use the force to settle the particles and the gas. separate.
