Breaking hammers are very common in people's daily life. In the whole process of application, the transportation of raw materials and the operation of machinery and equipment will affect a lot of high-pressure gate valve particles in the surrounding environment, causing damage to machinery and equipment and employees. So in order to better How to purify indoor air and how to do ash removal by hammer crushing?
1, brush and remove dust
Let the air and the sprayer water touch to capture the solid inside. The common spray dust removal tower is cleaned by the air below and the water above the upper sprayer, and the cleaning pipe has a good ash removal effect.
2, Inertial force ash removal
It is used to separate the particles and air above 5UM. When the smoke and dust air hits the partition of the inertial force dust collector in an offset position, the particles are absorbed due to the effect of the inertial force. In order to avoid the aviation effect of impact and impact, it cannot be used. too high rate.
3, Electric ash removal
This method is to make the solid particles in the air positively charged, and then attracted to the electrode with the opposite positive charge, in order to achieve the goal of removing dust for the breaker. The electrostatic precipitator increases the tens of thousands of volts between the alloy discharge electrodes. The DC voltage hydrolyzes the air between the two poles. When the negatively ionized air collides with the solid particles, the solid particles are also negatively charged, attracted by the anode, and accumulated after neutralization. This method is suitable for places with high requirements for ash removal, but The dust concentration is not suitable for too high, and the gas pressure is not suitable for too fast.
4. Centrifugal ash removal
Using the centrifugal force hundreds to thousands of times larger than the particle gravity in the air rotating motion, the solid particles settle along the peripheral wall to achieve the goal of ash removal. 20m\/S, the diameter of small particles that can be captured can reach 5UM or less.
5, Gravity ash removal
It can solve the coarse particles above 100UM, used for the pretreatment of coarse dust and other crushing hammers to remove ash. The operation steps are to introduce the dust-laden air into the large-volume gravity settling box, reduce the air flow rate, and use gravity to separate the particles from the air.
