Because of its low noise work, vibratory rammer does not interfere with the surrounding environment during construction, and the key parts are made of high-toughness board and high-wear-resistant board, quality assurance, and is widely used in every building construction. In order to ensure the application efficiency of the rammer, We not only need to strengthen the usual maintenance, but also need to pay attention to many problems in the application, the main contents are as follows:
1. Please ensure that any pipes are properly installed and any oil return routes are fully extended.
2. Please ensure that the oil flow rate and applied working pressure are properly adjusted.
3. Open the tamper, please place the tamper on the object to be tamped, and make sure to apply a small working pressure within the first 10-20 seconds. Different applications can be selected according to the tamping objects that are not used. work pressure.
4. In the case of tamping, alternately apply large and small forces. First apply a slight tamping force, and then apply a slightly larger tamping force. Continue to rotate. Please do not tamper too much and exceed the bearing capacity.
In addition to the above, before using the facility, please ensure that any pipelines are properly installed, and any oil return routes are completely spread out. Strengthening the usual protection and proper application are indispensable elements to ensure the service life of the vibratory rammer. Looking forward to the above The content can have a certain effect on your future use.
