Vibration compactor belongs to excavator attachments, which are used to compact the road surface. It can compact the floor plan, slope, ladder, pipe trench, dent, edge, abutment back, etc. So how do we choose the vibration compactor correctly?
How to choose the right vibrating rammer
First, pay attention to the motor of the vibratory rammer, because its quality can directly interfere with the determination of the application function and service life of the vibratory rammer;
2. The total area of the ramming plate of the vibratory rammer, the larger the total area of the rammer plate, the better, the larger the motor can not stand, it is very easy to increase the failure rate of the equipment, and the smaller the motor is, it is easy to leak the motor to the outside, so the manufacturer cannot let the manufacturer buy it. Change the total area of the tamping plate at will;
3. Whether the shaft sleeve in the main box is imported, it is very easy for centrifugal force to cause steel balls to smash and slip;
4. Installation and machining accuracy. There is an eccentric wheel in the main box of the vibratory rammer. The rotation of the eccentric wheel must ensure that the coaxiality does not exceed 0.001mm, otherwise it is very easy to get stuck and not run;
5. If the oil seal is imported accordingly, the rotation of the eccentric wheel during operation is very likely to cause the temperature of the coolant to rise, and the oil seal of poor quality is very likely to age prematurely and cause oil leakage;
6. Does the main box have a control valve? The huge function of this valve is to maintain the motor and protect the overpressure. In addition, the customer seems to have a slightly larger or smaller energy, and can be adjusted casually.
Vibratory rammers are mainly suitable for compacting raw materials with low cohesiveness and sliding friction between particles, such as river sand, gravel and asphalt.
