During the construction phase of the construction project,HammerIt plays a very important role in excavating the basic function of housing construction, which can better remove the fluctuations and soil in the rock gap, and carry out a more efficient solution to the bottom of the engineering building, making this project smoother. And the standard is carried out. However, in order to make full use of this type of machinery and equipment, it must take these multiple levels into account when selecting it.
1, the total weight and bucket capacity of the excavator
Considering that the total weight of the excavator can avoid the complete flexion and extension of the arm, because the total weight of the breaker is too large, the excavator will overturn, and if it is too small, the function of the excavator cannot be fully utilized, and the destruction of the hammer head will also be accelerated. Only when the total weight of the excavator is consistent can the excavator and its functions be fully utilized.
2, the total flow and working pressure at work
The total flow of hammers of different sizes is different. The total flow of the hammer can be as small as 23L per minute, and the sledgehammer can achieve more than 400L per minute. After selecting it, the total flow needs to be the same as that of the excavator. The total flow of input and output of the emergency valve is in line with the total flow. The size of the total flow depends on its output power, that is, the number of influences per minute, and the total flow is positively related to the frequency of influence. When the total input and output flow of the emergency valve of the excavator exceeds the requirements of the hammer head When the total flow rate is high, the hydraulic transmission system will cause excessive heat generation, resulting in excessive system temperature and reducing the service life of components.
3, structure vehicle