HammerThe excellent performance of the machine cannot completely guarantee the construction and application of the project. The high-quality mechanical equipment control staff with the necessary professional skills can obtain more utilization rates, reduce the frequency of common failures, and increase the service life.
The main manifestations of the operation errors of the breaker are:
1. Too much lubricating oil. Appropriately adding lubricating oil is to ensure the flexible relative speed of spare parts, but it must be paid special attention that the introduction of butter is not suitable for too much. When the mechanical equipment shakes, it will continue to enter the hydraulic transmission system.
2. Assemble the breaker and the excavator at will. There are different types from the excavator. The manufacturer has restrictions on the hydraulic flow of the hydraulic hammer. It is recommended that the customer choose to install according to the main parameters provided by the manufacturer. If the working pressure is too high than the installation requirements, the speed control valve must undertake the tedious separation and pressure relief operation. When working under high voltage, it will cause the pipeline to crack, the temperature of the gear oil part is too high, and it will cause the hydraulic reversing valve. Serious damage will seriously endanger the service life of the hydraulic system.
3. Unscrupulous control of engineering construction. The breaker can give full play to crushing block objects, but it is not invincible. Do not use it to move\/pry up stones, which will easily cause the drill to break and the support frame to be damaged. When crushing, it should be Keep it vertical to the material, and make the drill rod press against the crushed object. If the hammering direction is skewed, the drill bit is very easy to dislocate during the hammering operation, which may cause the drill bit and the piston rod to crack or get stuck.