HammerThe application includes the loading, unloading and handling stage and the construction stage of the smashing project of the project. Firm installation and use cannot fully ensure the safety of the application. The standard practical operation of the project construction stage is the top priority.
There are various reasons for the consideration of the application of the breaker. The damage to the mechanical equipment is not only from the interaction force of the crushing work, but also the operation steps of the excavator's safe driving and the actual operation staff. How to actually operate the excavator's mechanical arm manipulation, Adjusting to a suitable reaction force angle of view can give full play to the crushing rate and control all normal damage to a small range without causing additional damage. It is the main standard of the actual operation process.
During the construction of a specific project, the crusher should maintain a 90-degree angle to the surface of the crushed object, that is, the surface of the crushed object should be in a vertical orientation, and try to maintain it anytime and anywhere. If the angle of the crusher is skewed, the crushing head will slip off the surface of the crushed object, which will The pulverizer is subjected to side force, causing rapid damage or breakage of the drill rod, and even damage to the piston rod. In addition, please select a moderate severe blow point before severely hitting, and make sure that the drill rod is indeed firm. , and then gradually complete the work and crack down on it.
When the breaker is working, the drill rod should maintain a vertical position with the surface of the object to be crushed from beginning to end. Make the drill rod press the object to be crushed, and stop working after crushing, so as to avoid empty beating. Constant aimless influence It will cause damage to the precursor and loosening of the anchor bolts of the main body, which can damage the server itself in severe cases.