The method of improving the striking force of large breaking hammer

2020-10-23

The power source of the large breaker is the pressure oil provided by the pump station of the excavator or loader, which can better clear the floating objects and soil in the gap between the rock blocks during the excavation of the building foundation. The correct actual operation of the breaker will have It is conducive to the rapid development of the crushing work. When the actual operation is insufficient, the hitting force cannot be fully exerted. At the same time, the impact force of the breaker will affect the main body of the breaker, the protective plate and the actual operating arm of the construction machinery itself, causing the above components. damage. How should we actually operate and increase the impact of the breaker? The following points should be noted.

1. Preparation before crushing

When the high pressure or low pressure hose of the large breaker is too loose, please suspend the operation immediately, and carry out inspection and maintenance immediately. At the same time, for the sake of safety, try to check whether there is oil leakage in other positions at the same time. The actual operator should strictly It is required to keep an eye on the hit point at all times.

2. Avoid letting the big breaker hit aimlessly.

When the rock block or target is crushed, please suspend the hitting action of the large breaker immediately. Continuous and aimless hitting can only cause loosening and damage of the front fuselage and fuselage screws, and even damage the construction machinery.

3. Do not push heavy objects or large stones with a large breaking hammer.

When working, do not use the guard plate as a tool to push heavy objects, which will only cause the guard plate screws and drill rods to break, damage the breaker, and even the main reason for the breakage of the boom.

4. Pay attention to the actual operation direction of the breaker

When using a large breaking hammer to carry out the crushing operation, please make sure that the direction of the hitting point of the drill pipe is perpendicular to the surface of the object to be broken, and keep it for a period of time. In such a case, the drill pipe will be damaged and the piston will be affected. When it is broken, please select a suitable hitting point first. After confirming that the drill pipe is really stable, hit again.