How to correctly choose the use angle of the hammer head of the guardrail pile driver

2020-07-20

The use of the hammer head of the guardrail pile driver includes loading and unloading links and engineering crushing construction links. Stable installation does not completely guarantee the safety of the breaker. The standard operation of the construction link is more important. If the angle is not set, it is easy to control the equipment. Cause damage. So how to choose the angle of use of the hammer head of the pile driver during construction?

Various factors must be considered when using it. Not only the crushing force, but also the operating method of the excavator driver's hammer, cause damage to the machine. How to operate the mechanical arm of the excavator to control the breaker, adjust the force angle, give full play to the due crushing efficiency, and control the normal wear in a small range without causing additional damage, which is an important indicator of operation technology.

In the working process of the hammer head of the guardrail pile driver, the drill rod should always be perpendicular to the surface of the broken object. If the object is broken, the hammer should be stopped immediately to prevent empty bullets. Continuous aimless impact will damage the precursor of the breaker, the main bolt will be loose, and in severe cases will damage the host itself.

In order to complete the construction work efficiently, every operation cannot be ignored.

The hydraulic breaker is abbreviated as "breaker". Its power source is the pressure provided by the excavator or pumping station. Therefore, it can crush stones and rocks more effectively in construction and improve work efficiency.

We must pay attention to the maintenance and maintenance of the hammer head of the guardrail pile driver: first check the nitrogen. Before charging, check the safety of the equipment. Except for nitrogen, no other gas must be allowed to enter the upper body; fill the upper body with nitrogen Do not approach the front of the steel drill; when the inflation is completed, the hammer steel drill will automatically extend. Secondly, check the whole body bolts. Before unscrewing the whole body bolts, the gas pressure in the upper body should be completely released, otherwise the upper body will eject when the whole body bolts are removed, causing serious consequences.