Hammer Manufacturer Impact Crusher: The entrance is small, it can usually process materials within 100-500mm, the maximum compressive strength is 350mpa, and the crushing efficiency is high. The crushed raw materials are cubes or prisms.
Heavy-duty crusher: including heavy-duty hammer crusher and heavy-duty box-type crusher. The feeding port of heavy-duty crusher is very large, and it can usually solve the block materials of 800-1500mm, and it can be crushed at one time, eliminating the need for secondary Crushing becomes primary crushing. The crushed material has uniform particle size, geometric structure or symmetrical prismatic shape, and is widely used in crushing stone production lines, limestone crushing and construction waste crushing. The performance of the heavy-duty crusher is the same as that of the heavy-duty hammer crusher. The key difference is that the heavy-duty hammer crusher is arc-shaped, and the heavy-duty box-type crusher is a square box-shaped discharge port. The crushing space in the impact crusher is large, and the hammer head flexibly uses the effect of the rotor rotation, that is, the bottom And the upper impact on the damaged material, and throw it on the impact liner; In addition, the self-impact crushing generated by the back-and-forth impact of the material has a variety of compound crushing functions, high energy utilization rate, and low energy consumption for enterprise output. Metal costs are low.
There is no grate adjustment at the discharge port of the crusher, the discharge is smooth, the processing capacity is large, and the technical parameters are well-proportioned. It is very easy to reduce large pieces of material, but it is difficult to reduce small pieces of material, so it is necessary to change the rotor speed to adjust Technical parameters. Most of the products of the crusher are m3 pieces, and the parameters are generally 5-10mm. The technical parameters of the hammer crusher without adjusting the grate are fine and symmetrical.
One end of the impact liner is suspended on the casing by the live hinge rod, and the other side is kept in the same position by the suspension screw. When the hard-to-break material or iron sheet is sandwiched between the rotor and the counter-attack liner, the live hinge rod When the pressure is released, the counter-attack liner retreats accordingly, increasing the space, allowing objects that are difficult to break to pass through, and protecting the rotor and hammer head from damage.
