Selection of vibrating rammer

2023-07-26

Vibratory rammers belong to the accessories of excavators, which are used to tamp road surfaces, and can be used to tamp floor plans, slopes, steps, pipe trenches, dents, edges, abutment backs, etc., so how do we choose vibratory rammers correctly?

How to choose the vibratory rammer correctly

First, pay attention to the motor of the vibrating rammer, because its quality can directly interfere with the determination of the function and service life of the vibrating rammer;

2. The area of ​​the ramming plate of the vibrating rammer is not as large as possible. If the motor is too large, it is easy to increase the failure rate of the equipment. If it is small, it is easy to expose the motor to the outside. Therefore, the manufacturer should not let the manufacturer know when purchasing Randomly change the area of ​​the ramming plate;

3. Is the shaft sleeve in the main box imported? It is very easy to cause centrifugal force in China to cause the steel ball to smash and slip off;

4. Installation and processing accuracy. There is an eccentric wheel in the main box of the vibratory rammer. The rotation of the eccentric wheel must ensure that the coaxiality does not exceed 0.001mm, otherwise it is very easy to get stuck and not run;

5. If the oil seal is imported, the rotation of the eccentric wheel during operation will easily cause the temperature of the coolant to rise, and the oil seal with poor quality will easily age prematurely and cause oil leakage;

6. Is there a regulating valve in the main box? The great function of this valve is to maintain the motor and protect the overvoltage. In addition, the customer seems to have a little power or a little power, so it can be adjusted at will.

Vibratory rammers are mainly suitable for tamping raw materials with small cohesiveness and sliding friction between particles, such as river sand, gravel and asphalt. The bill of quantities is very large, so you must keep your eyes open when purchasing.