What inspection work does the breaker have?

2022-03-15

Now, let’s master the inspection work of the breaker with you. What are the key points that must be paid attention to?

1. Determine the condition of anchor screws, screw caps, etc.

The breaker will produce anchor screws and screw caps during work, which will lead to major accidents. Therefore, before application, please check whether the anchor screws and screw caps of each component are loose, damaged or dropped. If necessary, please tighten them. or disassemble.

2. Add lubricating grease to the drill components

Please add lubricating grease after 3 hours of work. (Note: Please add lubricating grease when the drill is compacted as much as possible.) As far as possible, add lubricating grease when the drill is suspended in the air, and the lubricating grease will be Entering the room for strict investigation and punishment may cause abnormally high pressure during operation, which may damage the breaker. Therefore, please add lubricating grease as much as possible when the drill is compacted.)

3. Check the gear oil quantity and air pollution level

Before using the breaker, please confirm whether the hydraulic oil filter oil is sufficient. Determine the air pollution level of the gear oil immediately, because the air pollution of the gear oil is the main cause of the problem of the machine equipment. Note: It is recommended to remove the gear oil every 600 hours.