Precautions for the application of vibratory rammers

2021-11-03

Because of its low noise operation, the vibratory rammer does not interfere with the surrounding environment during construction, and the raw materials for key parts are made of high-toughness board and high-wear-resistant board, quality assurance, and is widely used in every building construction. In order to better ensure high application efficiency, Not only do you need to do a good job in the usual maintenance, but you also need to pay attention to many problems in the application. The main contents are as follows:

1. When opening, please store the machine and equipment on the object to be rammed, and in the first 10-20 seconds, please ensure that a small working pressure is applied. You can choose different applications according to the objects you don’t need to ram. pressure.

2. If the hydraulic vibratory rammer needs to be stored properly when it is out of use for a long time, it should be stored under the conditions of high temperature and -20 degrees with the tightness of the oil inlet and outlet.

3. During application, the hydraulic breaker and fiber rod should bisect the working surface vertically, on the principle of no radial force.

4. When the rammed object has cracked or cracked gradually, the impact resistance should be terminated immediately to prevent unfavorable "empty hitting".

5. During the operation, the tamping plate must be pressed on the rock layer first, and the corresponding working pressure must be maintained before the breaker is operated. It is not allowed to run in the state of being suspended in the air.

6. After completing the work task, it is not necessary to put the overloaded objects in the vibration frame for the night. When storing, twist the compacting plate to the side or the bottom when storing, twist the compacting plate to the side of the machine or the bottom. end.

In addition to the above, before using machinery and equipment, please ensure that any pipelines are properly installed, and any oil return routes are completely spread out. Doing a good job in daily maintenance and proper application are the essential elements to ensure the service life of the vibratory rammer. Hope the above content can be helpful for your practical operation in the future.